Capability
Pick-and-place is the routing stage of the in-house SMT PCB production line. Each component pulled from a feeder, vision-aligned, and placed on the board at the right rotation and position. The LS60 handles small chips, BGAs, and tall components on the same panel.
Our SMT line is sized for prototype-to-low-volume production and NPI work, typically under 5000 units per batch with mixed-component boards. For higher-volume runs we plan capacity together during DFM and BOM review.
Tape, tray, tube, and loose components loaded into 96 single positions (144 with bank).
CPL file loaded, fiducial alignment confirmed.
Vision-assisted placement at +/- 0.025 mm accuracy across the panel.
On-head vision plus downstream AOI confirm placement.
up to 4800 cph theoretical, typical 2500 to 3600 cph
Gerber RS-274X, ODB++, and IPC-2581 for PCB data. BOM in xlsx or csv with manufacturer part numbers. CPL or pick-and-place file in csv or txt. Step files for enclosures. Firmware binaries as hex, bin, or signed image bundles.
We work from pilot batches through repeat production. The sweet spot for our SMT line is low to medium volume, typically under 5000 units per batch with mixed-component boards. We plan capacity in advance during DFM and BOM review for larger volumes.
Share your BOM, gerbers, and CPL. Engineering reviews fit, throughput, and DFM, and replies within one business day.
